Related Searches: Prep Station | Paint Prep Station | Mobile Prep Station
Product List

Prep Station BY-10

This paint preparation station is used to collect dust and iron splash during grinding and make working environment clean and tidy. This prep station spray booth can centralize treat the dust, splash iron and other debris and make production safely.
This paint preparation station adopts 50mm EPS wallboard on its back side and PVC curtains on the other three sides. Workers operated this machine in this paint preparation station. With the adoption of ventilation and dust removal system exhaust fan, the room is in negative pressure condition and dust produced during production is limited in prep stations. It is collected by dust unit and exhausted after filtration by filter dust. This process of China prep station spray booth can control the dust exhaust effectively and protect production environment.

Features

Bright full booth illumination of paint preparation station is provided by eight (8) four-tube, 36-watt fluorescent light fixtures in the ceiling panels. Each is sealed behind clear tempered safety glass. All fixtures are made by China and approved for their intended use and placement.

Advantages of Prep Station Spray Booth

1. The overall structure of paint preparation station is welded seamlessly with square steel tubes. This frame structure has high solidity and strong supporting force. The prep station wouldn’t shake when several people work at the same time. After paint handling, this prep station can be used in wet environments for a long time. The surface is not easy to paint stripping, rust and alkalinity.
2. Polished table of paint preparation station uses perforated plates and it has high hardness. With the support of frames, the product won’t change shape and ensure even surface.
3. The following spare parts of China prep station spray booth are optional: infrared lamp, heating system, basement, and recovery system.

Parameters of Paint Preparation Station

Outside Dimension
7550×3550×3100mm(L×W×H)
Inside Dimension
6300×3450×2650mm(L×W×H)
Plenum Dimension
6300×3450×450mm(L×W×H)
Room Body
Back side with 50mm EPS wallboard, the other 3 sides with PVC curtains;
Light
Ceiling lights 8units×4pcs=32pcs×36W, with electronic ballasts
Generator Cabinet
Exhaust from rear side; square steel frame, galvanized steel cover.

Intake and Exhaust System
1 unit 5.5KW double intake centrifugal fan, model YDW-4.5S, air capacity: 15500 m 3/h, electric damper for exhausting.
Purification System
Pre-filter, high efficiency filter, exhaust fiberglass filter
Roof
Galvanized steel
Control System
Fan operation switch, lighting switch, emergency stop;
Install Say
Suspending steel hook from roof of building or steel column supporting;
Total Power
6.7KW
Related Products